<acronym id="4o24e"><small id="4o24e"></small></acronym><acronym id="4o24e"><center id="4o24e"></center></acronym>
<acronym id="4o24e"><center id="4o24e"></center></acronym>
<acronym id="4o24e"><center id="4o24e"></center></acronym>
<rt id="4o24e"></rt><rt id="4o24e"><optgroup id="4o24e"></optgroup></rt><rt id="4o24e"><small id="4o24e"></small></rt><rt id="4o24e"></rt>
<acronym id="4o24e"></acronym>
English | 添加收藏 | 設為首頁
您所在的位置:網站首頁 > > 產品中心 > 彈性體材料 > TPE熱塑性彈性體熱塑性耐油彈性體 NB-4000
熱塑性耐油彈性體 NB-4000
Oil Resistance Thermoplastic Elastomeric Compound...
型號:0

參考價:¥

說明:如您對該產品感興趣,請在此輸入您的手機號將本產品的地址 發送至您手機上。
Product Description 產品描述
NB-4000 series are dynamic or non-dynamic TPNBR & TPVC compounds which are dynamic vulcanized by nitrile rubber and polar resin or non-polar resin. They have excellent oil-resistant (ASTM3# oil, fuel oil, gear oil, brake oil, lubricant oil), anti-ozone, anti-climate, strength and anti-flex properties. They can meet RoHS Standard, and have no heavy metals. NB-4001 is low-halogen flame retardant while NB-4003 is halogen-free. Hardness of NB-4000 series are 75A-40D.
NB-4000系列是丁腈橡膠與級性或非級性樹脂的動態或非動態硫化共混物(TPNBR&TPVC)。有優異的耐油(ASTM3#油,燃油,齒輪油,制動油,潤滑油),耐臭氧,耐候性;強度,耐曲撓性具優。符合歐盟的RoHS要求,不含重金屬等有害物質。其中4001為低鹵阻燃型,4003無鹵。本系硬度范圍:75A~40D。
 
Application 主要用途
-       Oil seal and car seal in all kinds of hardness
-       All kinds of oil delivery pipe, oil pipe, car trundle in oil environment, Omni-directional wheel
-       Foot-ware which is oil-resistant, corrosion resistant and abrasion-resistant, protective boots
-       Oil resistant cable jacketing, like mining usage, locomotive and welding machine cables
-       各種硬度范圍的油封和車用密封件
-       各種輸油管,熱油管,油環境中車用腳輪,萬向輪
-       耐油,耐腐,耐磨工作鞋,防護靴
-       電纜用耐油護套:如礦用,機車,焊接機電纜
 
 
Processing Indicator 加工工藝 
Machine Barrel Temperature
機筒溫度
Molding Temprature
機頭溫度
Melting Temperature
熔體溫度
150– 180 ℃ 185 ±5℃ 175±5℃
The temperature mentioned above is for reference only, and should be modified according to different extrusion machines and screw structures. 以上溫度僅作參考,根據擠出機及螺桿結構的不同,可相應調整。
 
Dry Condition 干燥條件 
No need for drying in normal environment. If the compound was affected with damp, dry it in 90℃ conditions for 2-3 hours, or in 70-80℃conditions for 3-4 hours. Keep the moisture content of the compound smaller than 0.1wt%.
一般不需干燥。如受潮,在90℃條件下干燥2-3小時,或在70-80℃條件下干燥3-4小時,保持樹脂含水量小于0.1wt%后再使用。
 
Physical and Electrical Properties 物理及電氣性能
Item
試驗項目
Unit
單位
Typical Data
典型值
NB-4001 NB-4002 NB-4003
Density at 23℃
23℃密度
g/cm3 1.452 1.09 0.956
Hardness
硬度
Share A 85 82 92
Highest Working Temp.
最高使用溫度
120 120 ---
Tensile Strength
拉伸強度
MPa 15 18.7 14.2
Elongation at Break
斷裂伸長率
% 330 440 240
Compression Set
壓縮永久變形
70℃×22hr
%
45 40 ---
Abrasion
磨耗量(阿克。
cm3/1.61kM 0.08 0.12 0.2
Ozone Resistance Aging
耐臭氧老化
50×10-8
Tension 20%
40℃×72hr
No crake無裂紋 No crake無裂紋 No crake無裂紋
Low Temperature Impact
低溫沖擊
-25℃ Pass
通過
Pass
通過
Pass
通過
Brittleness Temperature
脆性溫度
-40 ---- ----
Air Aging Condition
熱空氣老化條件
136℃×168h
Variation of Tensile Strength拉伸強度變化率 % +22.6 +20 +12
Variation of Elongation
斷裂伸長變化率
 
% -32.4 -28.9 -15
Flame Retardant (Uprightness)
阻燃性(垂直燃燒)
/ V-0 ---- ----
 
 
 
色情成人视频综合网站,亚洲成女人城区,色噜噜综合在线,色天天综合色天天
<acronym id="4o24e"><small id="4o24e"></small></acronym><acronym id="4o24e"><center id="4o24e"></center></acronym>
<acronym id="4o24e"><center id="4o24e"></center></acronym>
<acronym id="4o24e"><center id="4o24e"></center></acronym>
<rt id="4o24e"></rt><rt id="4o24e"><optgroup id="4o24e"></optgroup></rt><rt id="4o24e"><small id="4o24e"></small></rt><rt id="4o24e"></rt>
<acronym id="4o24e"></acronym>